Warm White Light-emitting Diodes Research Articles

Spectral studies of thermally stable Dy3+/Sm3+ co-doped Li2Ba5W3O15 phosphors for warm white LEDs

In the current study, a series of Li2Ba5W3O15: RE3+ (RE = Dy, Sm) [LBW:Dy3+/Sm3+] phosphors were prepared using a high-temperature solid-state method. X-ray diffraction, Scanning electron microscopy with energy-dispersive x-ray analysis scans showed that the crystal form was consistent with the standard LBW and comprised small irregularly shaped particles. Diffuse reflectance spectral (DRS) data was utilized to calculate the band gaps. Fluorescence study shows that LBW material doped with Dy3+ and Sm3+ yield distinct colors at 496 nm (blue) for Dy3+ and 582 nm (green-yellow), 612 nm (yellow), and 669 nm (red) for Sm3+ when excited by near-ultraviolet (336 nm) light. The observation of energy transfer between Dy3+ and Sm3+ ions play a role in modifying the luminescence of LBW:Dy3+/Sm3+ co-doped phosphors. With a constant excitation wavelength (λ Ex), different levels of activator doping lead to a change in the emission colors from their neutral white light to a deep orange-red region for LBW:Dy3+/Sm3+ phosphors. The decay curves demonstrate a decrease in lifetime with an increase in the concentration of activator ions (Sm3+). For D3S5 phosphor, the temperature-dependent photoluminescence characteristics were analyzed under λ Ex = 336 nm excitation. The results indicate excellent luminescence thermal stability with an activation energy of 0.16 eV at λ Ex = 336 nm. With its low color-correlated temperature and good thermal stability, the prepared phosphor sample shows potential as a solid-state emitting phosphor that can be used with UV chip stimulation for warm white LED applications.

Efficient preparation strategy of high quantum yield multicolor CDs for warm white LED

Multicolor carbon dots (CDs) possess tremendous potential applications, especially in optoelectronic devices. However, further applications in warm white LED have been constrained due to the extremely low quantum yield (QY) of multicolor CDs. In this work, fluorescence enhancement multicolor CDs (o-CDs(cat.) (emitted yellow, Em = 550 nm, QY = 85.4 %), m-CDs(cat.) (emitted blue, Em = 440 nm, QY = 35.7 %), p-CDs(cat.) (emitted red, Em = 610 nm, QY = 73.8 %)) with almost 15 % QY improvement, without changing the fluorescence emission wavelength, was successfully achieved by introducing MnSO4 into the reaction system. The relevant mechanism may be the catalytic effect of MnSO4, which leads to the increased content of C = N and pyridine N, further suppressing non radiative transitions, leading to the increasement of QY. Finally, the obtained high QY multicolor CDs were applied to warm white LED with the color coordinates (CIE) of (0.33,0.36), color rendering index (CRI) of 90, correlated color temperature (CCT) of 3473 K. Laying the foundation for the research methods and mechanisms of metal ion caused high QY of CDs.

STUDY OF K2SiF6:Mn4+@SiO2 PHOSPHOR FOR WHITE LEDS WITH HIGH ANGULAR COLOR UNIFORMITY

The distinctive wide-band blue illumination absorption and red strait-line discharge of the phosphor K2SiF6:Mn4+ (KMnSF) make it an attractive material for manufacturing warm white light-emitting diodes (WLED). Nevertheless, using the highly corrosive raw ingredient HF to produce commercial KMnSF red phosphor has negative effects on the environment and people. In this study, microfluidic technology was used to successfully manufacture the KMnSF without the need for HF compound while resulting in a phosphor product with homogenous granule shape and size. The luminescence capabilities of the KMnSF samples were then thoroughly examined and characterized. Eventually, we made WLED packages comprising of blue LED chips, yellow phosphor Y3Al5O12:Ce3+ (YGA:Ce), red phosphor KMnSF, and SiO2 scattering particle. Via varying the SiO2 concentration during the simulation process, the prepared WLED’s optical performances are obtained. The scattering properties of the phosphor layer as well as the lighting transmission and distribution were simulated with the utilization of both LightTools software and Monte Carlo theory. According to the outcomes, the microfluidic-synthesized K2SiF6:Mn4+ proves to be appropriate for WLED apparatuses. Besides, the proposed phosphor compound with SiO2 scattering particles showed the improvement in luminous flux and angular uniformity of the WLED.

The effect of different light wavelengths on the germination of lettuce, cabbage, spinach and arugula seeds in a controlled environment chamber

The rapid development of vertical farming techniques in recent years has accelerated the necessity for a more thorough investigation into the utilization of artificial lighting. Cultivation in controlled environment systems primarily relies on artificial lighting to provide energy to the plants. One food category that has surged in popularity in recent years is microgreens, which are seedlings consumed during their early stages of growth. Hence, enhancing seed germination and promoting rapid seedling growth can yield significant benefits in this field. The main aim of this study was to analyze how lettuce, cabbage, spinach, and arugula seeds respond under various light spectra and photoperiodic schemes. The selected spectra were UV-A, blue, red, far-red, blue+red, blue+red+far-red, cool-white LED, warm-white LED and darkness, under three different photoperiods: 4, 12 and 24 h. All lighting treatments presented different effects on both seed germination and the morphological characteristics of the seedlings. Lettuce and spinach seeds exhibited robust germination capacity in both darkness and light. However, significant increases in germination rates were observed for cabbage and arugula when exposed to light. In the case of lettuce, a 12 h photoperiod with a blue spectrum led to a 100% germination rate and a leaf area of 77.4 mm². For cabbage, the highest germination rate observed was 70%, which occurred under a blue-red spectrum with a 12 h light cycle. The corresponding leaf area was 44 mm². Spinach exhibited its highest leaf area, reaching 119.16 mm², and a 90% germination rate when exposed to a four h far-red spectrum. Arugula achieved its greatest leaf area, measuring 58.57 mm², and a germination rate of 70% when exposed to a 24 h photoperiod combined with blue-red-far-red lighting. The proper combination of spectra can significantly enhance seed germination rates and guide the plants’ growth towards the desired morphological characteristics.

A new yellowish‐green‐emitting phosphor: Eu2+‐doped Ba3YAl2O7.5

AbstractA yellowish‐green emitting phosphor Ba3YAl2O7.5:Eu2+ was synthesized by a solid‐state method. The crystal structure, luminescence, concentration quenching, fluorescence decay, and thermal quenching properties were systematically investigated. Under blue light (440 nm) excitation, Ba3YAl2O7.5:Eu2+ phosphors exhibit a yellowish‐green emission peaking at 550 nm with a full width at half maximum ∼ 69 nm, and The Commission Internationale de l'Eclairage (CIE) coordinates of Ba3YAl2O7.5:Eu2+ are (0.4064, 0.5811). Structural analysis and Van Uitert equation along with fluorescence lifetime analysis reveal that Eu2+ ions occupy 6‐coordinated Y and 9‐coordinated Ba sites in Ba3YAl2O7.5, and therefore generate two emission sub‐bands at 582 and 548 nm. In addition, Ba3YAl2O7.5:Eu2+ phosphor remaining 43% photoluminescence emission intensity at 125°C with an activation energy of 0.372 eV. Utilizing the title phosphor (Ba3YAl2O7.5:3%Eu2+), commercial red (Ca,Sr)AlSiN3:Eu2+ (CSAlSi:Eu2+) phosphor, and InGaN‐based blue light emitting diode (LED) chip, a proof‐of‐concept warm white LEDs (WLEDs) with a color rendering index of 80.1, CIE chromaticity coordinates of (0.411, 0.381), luminous efficacy of ∼ 22.13 lm/W, and correlated color temperature of ∼ 3288 K is achieved. Thus, Eu2+ activated Ba3YAl2O7.5 phosphors have the potential application in WLEDs pumped by a blue LED chip for solid‐state lighting application.

Ce3+-Activated SrLu2Al3ScSiO12 Cyan-Green-Emitting Garnet-Structured Inorganic Phosphor Materials toward Application in Blue-Chip-Based Phosphor-Converted Solid-State White Lighting.

Phosphor-converted white-light-emitting diodes (WLEDs) with superhigh color rendering index (CRI) are the ongoing pursuit of next-generation solid-state lighting. One of the most important challenges is the limited improvement in CRI on account of the absence of a cyan component in the typical commercial combination. Here, a bright broad-band cyan-green-emitting phosphor with cubic garnet structure, SrLu2Al3ScSiO12:Ce3+ (SLASSO:Ce3+), was successfully reported, which can compensate for the absence of cyan cavity in the 480-520 nm blue-green emission region. With 439 nm blue-light irradiation, the as-fabricated SLASSO:Ce3+ phosphor yields a broad-band cyan-green emission with the maximum emission peak positioned at 525 nm and an appropriate full width at half-maximum (fwhm) of 111 nm, capable of providing more cyan emission component without sacrificing green emission. Meanwhile, the optimal SLASSO:2%Ce3+ phosphor features CIE color coordinates of (0.3254, 0.5470) with cyan-green hue, along with a high internal quantum efficiency of up to 93%. Additionally, thermal stability measurements at different temperatures reveal that the luminescence emission intensity of the proposed phosphor retains 44% of its original integral emission intensity at 423 K with respect to room temperature, while also demonstrating an excellent color stability (ΔE = 5.4 × 10-3). This work shows that the highly efficient SLASSO:Ce3+ garnet phosphor can be utilized as a potential cyan-green-emitting phosphor for filling the cyan gap, resulting in the construction of a high-quality warm WLED with high CRI for "human-centric" sunlight-like full-spectrum solid-state illumination.

Multiwavelength Excitation in Ho3+-Doped All-Inorganic Double Perovskites Achieved by Codoping Mn2+ for Warm-White LEDs and Plant Growth.

Doping lanthanide ions is an efficient method to modify the optical properties of lead-free double-perovskite halides. However, most lanthanide-doped double perovskites show a low luminescence efficiency and require a high excitation energy. Here, we have successfully prepared a series of Ho3+-doped Cs2NaBiCl6 microcrystals through a simple hydrothermal method and obtained strong characteristic emissions of Ho3+ at 492 and 657 nm under low-energy excitation (449 nm). After codoping Mn2+, apart from the characteristic emissions from Ho3+ under 450 nm wavelength excitation, the orangish-red luminescence consisting of the emission band centered at 591 nm from Mn2+ and a sharp emission peak at 657 nm from Ho3+ is obtained under 355 nm UV light excitation. Photoluminescence (PL) emission and excitation spectra, along with the PL decay curves, confirm the existence of an energy-transfer channel from Cs2NaBiCl6 to Mn2+ and then from Mn2+ to Ho3+. The enhanced absorption efficiency (10.5 → 70.7%) suggests that the codoping of Mn2+ overcomes the low absorption efficiency caused by f-f forbidden transitions of Ho3+. Finally, the diverse luminescent performance within the Cs2NaBiCl6:Ho3+, Mn2+ phosphor is realized by altering the excitation wavelength, thereby enabling its application in warm-white-light-emitting diodes and plant growth in this work.

Optical Management of Perovskite Solar Cells by Biomimetic‐Structured Polydimethylsiloxane Films

The application of antireflective (AR) films is a promising optical management strategy to improve the light utilization of perovskite solar cells (PSCs). Plumeria petals of different colors are employed as the master mold for the first time to prepare biomimetic AR films. Hierarchical morphologies replicated from the petals have a primary characteristic size in tens of micrometer scale. A strong scattering effect happens when the incident light hits the AR films, leading to a remarkably reduced reflectance with broadband enhancement of the transmission over the entire visible range. With the incorporation of the biomimetic AR film, the highest power conversion efficiency for PSCs reaches 23.56% with a large short‐circuit density (Jsc) of 26.54 mA cm−2, corresponding to an average enhancement of 6.17%. The enhancement effect is verified under 1.5G AM radiation with different tilted angles and warm white LED light source with different light intensities. Furthermore, optical simulations are performed to illustrate the structure–effective relationship. This work offers an interesting experience by learning from nature and provides valuable references for further refining the design of the AR films in micrometer scale.

Bright Blue Emission Lead-Free Halides with Narrow Bandwidth Enabled by Oversaturated Europium Doping.

Eu2+-based lead-free metal halide nanocrystals (LFMH NCs), including CsEuCl3 NCs and CsX:Eu2+ NCs (X = Cl or Br), exhibit highly efficient narrow-band blue photoluminescence, making them competitive candidates for next-generation lighting and displays. However, the growing mechanism of the aforementioned NCs lacks in-depth study, which hinders the development of Eu2+-based nanomaterials. Herein, we demonstrate the colloidal synthesis of CsBr:Eu2+ NCs based on an air-stable europium source. The NCs show deep blue photoluminescence centered at 444 nm, with a maximum photoluminescence quantum yield (PLQY) reaching 53.4% and a fwhm of 30 nm. We further reveal the mechanism that determines CsBr host growth and Eu2+ doping in CsBr:Eu2+ nanocrystals, especially dopant trapping and self-purification, that determine the PLQY level. Pure white, warm white, and cold white LEDs are fabricated based on CsBr:Eu2+ NCs, red and green phosphors, and their performance suits the needs of high-quality lighting.

Emission enhancement in the luminescence performance of warm red light-emitting LiSrVO4 :Pr3+ phosphors.

Warm red-emitting praseodymium-doped LiSrVO4 phosphors were synthesized via solid-state reaction. The phase formation was verified using an X-ray diffraction study and the morphology was investigated using a scanning electron microscope study. The LiSrVO4 :Pr3+ phosphors emitted red light when exposed to ultraviolet light, indicating their possibility for use in warm white light-emitting diodes (WLEDs). Furthermore, the effect of charge compensators on the luminescence characteristics was addressed. The decay time was investigated using time-resolved photoluminescence. Furthermore, thermal quenching was analyzed through temperature-dependent photoluminescence spectra. Their sensitivity was calculated using temperature-dependent decay time analysis. The colour purity of the emitted light could be measured by photometric analysis. This comprehensive investigation provides a thorough understanding of the luminescence properties of phosphors for WLED applications.

The design and synthesis of 1-phenylimidazo[1,5-a]pyridine – anthracene-based fluorophore for greenish-yellow organic light emitting diode and warm white LED

Solution-processed OLEDs offer a promising and affordable technology for solid-state lighting and superior self-luminous display panels. Herein, an imidazo[1,5-a]pyridine (ImPy)-based fluorophore decorated with an aromatic π-system anthracene is synthesized by a one-pot condensation approach. From the theoretical study, the energy difference between HOMO and LUMO is 3.1 eV. The molecule shows excellent thermal stability and electrochemical stability. It exhibits efficient intramolecular charge transfer and displays a positive solvatochromic photoluminescence emission band ranging from 528 nm in hexane to 586 nm in acetonitrile with large Stokes’ shift of ∼11,000 cm−1. The OLEDs made of this emitter displayed good device performance with luminous efficiency of 4.4 cd A–1, power efficiency of 2.2 lm W–1 and external quantum efficiency of 3.2%. Additionally, this OLED emitted greenish-yellow light with CIE coordinate (0.34, 0.45) and possessed a low turn-on voltage of 7 V. The material also used in white LED fabrication and the fabricated white LED displayed an excellent color rendering index (CRI), the luminous efficiency of radiation (LER), and correlated color temperatures (CCT) of 89328 lm W–1 , and 4907 K, respectively with CIE coordinate (0.35,0.32).

One-pot synthesis of high-efficiency one-dimensional perovskite phosphor for warm white LEDs

A simple one-pot method was used to synthesize one-dimensional perovskite phosphor, which was characterized using X-ray diffraction, scanning electron microscopy, and photoluminescence spectroscopy. The material demonstrates excellent photoluminescence properties and can emit warm white light with a color temperature of 4710 K and a color rendering index of 84.6. The simple one-pot method makes it easy to synthesize the perovskite phosphor, positioning it as a promising candidate for the production of warm white LEDs. This work provides a detailed analysis of the material's crystal structure and photoluminescence properties.

Nutrient Solution Application of a Calcium-mobilizing Biostimulant Mitigates Tipburn without Decreasing Biomass of Greenhouse Hydroponic Lettuce

Lettuce tipburn is a physiological disorder characterized by marginal necrosis and curling of inner, younger leaves caused by localized calcium deficiency, especially in low evapotranspiration environments that restrict mass flow and thus calcium mobility. Severe tipburn negatively affects the marketability and quality of greenhouse-grown hydroponic lettuce. We aimed to assess the effectiveness of a chemical-based, calcium-mobilizing biostimulant for mitigating lettuce tipburn when applied in hydroponic nutrient solutions. Butterhead lettuce (Lactuca sativa ‘Rex’) was grown indoors under warm-white light-emitting diodes at a mean photosynthetic photon flux density of 300 μmol⋅m−2⋅s−1 for 11 days. Subsequently, we transplanted seedlings into deep-water-culture hydroponic trays in a greenhouse at an air temperature of 24.6 ± 1.2 °C, relative humidity of 76.2% ± 7.4%, and 20-hour photoperiod with supplemental lighting from high-pressure sodium lamps. The plants were grown in nutrient solutions with and without the biostimulant codenamed CC US-2105 at two concentrations (22 and 220 μL⋅L−1). Data were collected from plant samples at three harvests at 14, 21, and 28 days after transplant (DAT). At 14 DAT, there was no tipburn under any treatments. Compared with the control, the biostimulant at 22 μL⋅L−1 increased shoot dry mass by 31%. At 21 DAT, the biostimulant at 220 μL⋅L−1 eliminated tipburn, and the biostimulant increased shoot fresh weight by 28%, irrespective of the concentration. At 28 DAT, despite sufficient calcium in the whole plant and the remaining nutrient solution, severe tipburn still occurred in plants that did not receive the biostimulant (control). Compared with the control, the biostimulant at the higher concentration of 220 μL⋅L−1 decreased the tipburn rating by 88% and the number of leaves with tipburn by 85%, increased the plant diameter by 11%, increased the total leaf number by six, and accumulated higher levels of manganese and zinc. In contrast, these parameters remained unaffected at the lower biostimulant concentration of 22 μL⋅L−1. At 28 DAT, shoot biomass was unaffected by the biostimulant. In conclusion, the calcium-mobilizing biostimulant is an effective strategy to mitigate hydroponic lettuce tipburn without decreasing biomass accumulation in greenhouse conditions.

Thermally stable double perovskite Ca2YTaO6: Tb3+, Eu3+ phosphor for warm white LEDs

Thermally stable double perovskite Ca2YTaO6: Tb3+, Eu3+ phosphor for warm white LEDs

Fluorescence properties of novel deep-red phosphor LiMg4SbO7:Mn4+ with excellent quantum efficiency and color purity for warm white LEDs.

Red fluorescent materials have important application value in the background light and LED lighting fields of displays. In this work, a novel type of rare earth free deep-red phosphor LiMg4SbO7:Mn4+ was prepared successfully, and its crystal structure, microstructure, fluorescence spectrum, quantum yield, thermal stability, fluorescence lifetime, color coordinates and color purity were studied in detail. The excitation spectra of LiMg4SbO7:Mn4+ phosphors are located at 200-600 nm, which can be matched with ultraviolet, near-ultraviolet, and blue-light chips. The exciting result is that the LiMg4SbO7:0.002Mn4+ phosphor exhibits astonishing quantum efficiency, thermal stability and color purity. Finally, the developed LiMg4SbO7:Mn4+ and the yellow phosphor Y3Al5O12:Ce3+ (YAG:Ce3+) were mixed and coated on a blue light chip (460 nm) to produce a w-LED, which exhibited warm white luminescence with color coordinates of (0.3575, 0.3809), correlated colour temperature (CCT) of 4687 K, and color rendering index (CRI) of 83.6. It is reasonable to consider that LiMg4SbO7:Mn4+ phosphors with excellent photoluminescence performance have great application value in LED lighting fields.

Assessment of light-emitting diodes for sampling phlebotomines (Diptera: Psychodidae) from an urban park of the Brazilian Amazon.

The present study aimed to assess different light sources for sampling phlebotomines (Diptera: Psychodidae) from Bosque Rodrigues Alves, a forested park surrounded by the urban area of Belém in the Brazilian Amazon. Centers for Disease Control traps, baited with blue, green, and warm white light-emitting diodes (LEDs), as test group, and incandescent light, as control group, were used. The electromagnetic spectra and luminous intensities of the light sources were characterized. Fractional vegetation cover at each sampling site was also estimated. Abundance, richness, rarefaction curves, Shannon and Simpson diversity indices, phlebotomines/trap/hour, and phlebotomines/trap/night were estimated and compared. The light sources of the test group presented greater luminous intensity than the control, but were similar to each other. There were no differences in vegetation cover at each site. A total of 1,346 phlebotomines comprising 11 species were sampled. The most abundant species were as follows: Nyssomyia antunesi (Coutinho, 1939), Trichophoromyia ubiquitalis (Mangabeira, 1942), Bichromomyia flaviscutellata (Mangabeira, 1942), and Th. brachipyga (Mangabeira, 1942). Light traps with LEDs had richness, abundance, and Shannon diversity indices similar to those obtained with incandescent light. The warm white LED had a higher Simpson's index than the other light sources. Phlebotomine responses to incandescent light were similar to those to LEDs in most analyses, confirming the applicability of these light sources as alternative devices for entomological surveillance. Low consumption ensures greater autonomy of the traps, providing better operability during fieldwork.

High efficiency warm-white light-emitting diodes based on copper–iodide clusters

High efficiency warm-white light-emitting diodes based on copper–iodide clusters

Dual emission quaternary alloyed quantum dots for white light-emitting diodes with high color-rendering index

We report the synthesis of manganese doped Ag–Zn–In–S(AZIS)/ZnS QDs for the facile fabrication of white light-emitting diodes (WLEDs). By controlling the ratio of Mn/(Zn + In), dual emission Mn:AZIS/ZnS QDs with different relative proportion of host emission and Mn2+-related emission were prepared. With proper doping, the emission of Mn: AZIS/ZnS QDs covers most of the visible spectrum. Based on the as prepared Mn:AZIS/ZnS QDs, a warm WLED device exhibited a highest color rendering index (CRI) of 92.5 companied by a correlated color temperature (CCT) of 3162 K. With the increasing of Mn2+ concentration, the corresponding WLED devices shown warmer CCT values and lower luminous efficiencies (LEs). The color-conversion efficiency of the QDs decreasing with the increasing of Mn2+ concentration may be responsible partly for the variation of device LEs. With further deep investigation on the mechanism of color-conversion between the exciting light and QDs, and the energy transfer from the host material to the manganese dopant, WLEDs based on the dual emission Mn:AZIS/ZnS QDs with better device performances are excepted to find diverse application in lighting fields.

Spectroscopic properties and thermal stability of a Mn4+-doped polyfluoride phosphor for application in solid-state lighting

In this study, an efficient polyfluoride red-emitting phosphor, Cs3RbGe2F12:Mn4+ (denoted as CRGF:Mn), has been synthesized using a simple co-precipitation method. The crystal and electronic structures, spectroscopic properties, and photoluminescence thermal stability of CRGF:Mn have been systematically characterized. The results show that Mn4+ ions experience a strong crystal field and present a series of intense red emission peaks under blue light excitation. Moreover, CRGF:Mn exhibits a high color purity (95.1 %), high internal quantum efficiency (82.4 %), and enhanced photoluminescence thermal stability at 150 °C, with an intensity of 113 % relative to room temperature. A warm white light-emitting diode exhibiting a low correlated color temperature (3572 K), high color rendering index (90.7), and suitable luminous efficiency (132.6 lm/W) was prepared using CRGF:Mn as a red component, demonstrating viable application in solid-state lighting.

Application of chelation effect in improving the triple properties of K2SiF6Mn4+ phosphors through composite modification

Mn4+-doped fluoride phosphors are limited by their poor moisture resistance in practical applications of white light-emitting diodes (WLEDs). Herein, a new red light-emitting phosphor KSF:MnK2SiF6:Mn4+ was synthesized based on a novel strategy combining surface treatment with hexamethylene tetramine (HMTA) and coating with a matrix, hereafter referred to as P-KSF:Mn. Given the formation of the coordination bond between N and Mn4+ and the strong hydrogen bond between N and F in the shell after the protonation of HMTA, a dense and firm shell of rare Mn4+ formed on the sample surface. P-KSF:Mn showed strong emission, waterproof property and luminescent thermal stability, and its fluorescence intensity was 1.81 times that of KSF:Mn. After soaking in water for 90 d, the fluorescence intensity of P-KSF:Mn was 90.7 % of the initial value. The integrated fluorescence intensity at 200 °C was approximately 416 % of the initial value at 25 °C. The strong luminous thermal stability was supported by strong negative thermal quenching (NTQ), which is explained by the phonon induction mechanism. The WLED prototype assembled with P-KSF:Mn emitted warm white light with correlated color temperature (CCT) = 3112 K, color rendering index (CRI) = 90.7, and luminous efficiency (LE) = 119 lm/W. The results show that P-KSF:Mn is a potential candidate for applications in the field of warm WLEDs.